Lo más importante de un vistazo
|Nuevos / Usados:||utilizado|
|Año de construcción:||1983|
|Longitud:||44,20 m (145,0 ft.)|
|Anchura:||7,32 m (24,0 ft.)|
|Locación de Amarre:||Rockland, ME|
Todos los detalles sobre este anuncio
|No hay informaciónes detalladas, por favor pongase en contacto con el comerciante para saber mas sobre esta oferta|
Descripción & EspecificacionesDescripción en español
We are proud to present the beautiful Maine Coasting Schooner “Heritage” for sale. She has been a fixture along the Maine coast for decades and represents one of the finest examples of traditional Maine shipbuilding available on the market today. The Heritage was a constructed as a commercial venture to be used as a cruise schooner in the Maine Windjammer Fleet. She boasts nearly 5000 sq. ft. of sail and weighs 165 long tons, including 20 long tons of outside lead ballast carried on the keel and another 13 tons of lead inside trim ballast. She comes equipped with a current COI, full electronics package, 2 pulling boats, full complement of sails, overnight accommodations for 30 and on deck accommodations for 60 day passengers and much more! A recent survey is available for qualified buyers. This listing is for the sale of the vessel only. Her very successful charter business based in Rockland, Maine is also for sale.
LOA 145 ft 0 in
Beam 24 ft 0 in
Length on Deck 94 ft 0 in
Minimum Draft 8 ft 0 in
Maximum Draft 18 ft 0 in
Engine/Fuel Type Other
Depthsounder - Uniden President MC300 Depth Sounder
Plotter - Standard CS500 Chart Plotter
Compass - Spherical Magnetic Compass
GPS - Standard CS500 GPS
VHF - Furuno FM 3000 VHF Radio Telephone
Radar - Furuno 4 KW 16 Mile Radar
Draft Board Up 8
Draft Board Down 18
Gross Tons 89
The general hull?characteristics include a clipper shaped bow with trail boards, full keel forefoot leading to a straight full length keel with centerboard, full round bilges midship with very little deadrise, sternpost hung rudder, and a counter stern with a tumblehome transom. There are no auxiliary propulsion engines as she is propelled by sail only with the aid of a yawl boat for close quarters maneuvering.
There are four watertight bulkheads forming five compartments that can handle up to?30 passengers and?8 crew in 14 double,?and?2 single cabins including a large galley area. Each of the cabins is equipped with shelving and?stowage under bunks, a small white porcelain sink with hot and cold water, overhead lights and reading lights?as well as?110volt outlets in each cabin.?Each of the hull compartments are very well ventilated and lit by deck skylights above.
From forward aft is the a forepeak for storage followed by a crash bulkhead, forward compartment with six double cabins located port and starboard. Two of which have their own private heads.The foremast is stepped on the centerline. This space is accessed by a centerline companion-way ladder leading from the forward deck house.?Heat is supplied to this area via a bulkhead mounted heater/stove.
Next is a large midship compartment with a crews?pilot berth?located on the centerline against the bulkhead. This is then followed by?four double berth cabins to starboard and?two single?cabins to port. There is a single crew pipe berth alongside the centerboard trunk. The companionway ladder for this section of the vessel is situated along the port side of the centerboard trunk and leads to the mid-ship coach house. The centerboard trunk runs nearly the entire length of this compartment but has integrated into the layout and design of the cabins in such a way as to give the maximum amount of space and comfort to guests.
Aft of the mid-ship compartment is Heritages large galley that boasts a fantastic meal preperation area to port with a large classic shipmate stove (at the time of this listing the owners are upgrading to a newer custom wood?stove), double sink, island type counter and storage cabinets. The messing area contains three large tables situated around the perimiter of this space with built-in bench style seating. Below the galley located on the centerline there are two firewood storage areas and a water tank that is accessed by lift out hatches. The companionway ladder is located at the forward end of the galley and is accessed on deck through the after coach house.
Aft of the galley is the Captains cabin which includes a double berth with a desk and built-in cabinetry to port against the forward bulkhead. Here you will also find two single berths with a settee to port and an enclosed head against the forward bulkhead. Access to the Captains cabin is from a companionway ladder located at the aft end of the after deckhouse.
The deck layout includes a windlass forward followed by two chain boxes, a centerline skylight, foremast, and a donkey engine located to port with hydraulic controls mounted on the forward house. The forward deck?house includes eight compartments that house the following;? power fire/bilge pump and tool room, three?enclosed heads one with a hot fresh water shower, emergency companionway, forward compartment companionway, generator room, and battery trays in a seperate compartment. Just aft of the forward house is the midship coach house with the companionway to the midship compartment and a large butterfly style skylight/hatch just forward of the mainmast.
The after, or main house, is approximately 25 in length and includes the galley coach house with a companionway forward.Ta?very large centerline?four?section?butterfly style skylight. Aft of the house is the large helm station with a steering box mounted on the centerline. There is also a companion way at the port side aft end of the house that leads to the captains quarters.
The deck is perimitered with 24 high main and lograils topped with heavy wide caps and short stanchions with lifelines. There are eighteen round flush mounted decklight prisims located along the main and quarterdeck areas to provide natural light in the cabins and common areas below.
In keeping with 19th century coasting schooners it is only natural that she is constructed of double sawn frame and built to very heavy scantlings by todays standards. A major consideration during the construction of Heritage was to ensure her longevity by incorporating better ventilation of the hull and the untilization of thorough treatment of all accessable timbers using high quality preservatives.
The backbone including stem, keel, keelson and sternpost are all made of winter cut red oak and bolted with both galvinized and stainless bolts. The stem is molded at approximatly 10 sided 12 and runs the full length of the vessel to a conventional sternpost. The forefoot area includes heavy knees that run aft for nearly five bays. She is equipped with external lead ballast that is bolted to the keel in approximately ten scarphed sections with 1 diameter stainless bolts that run up through the keelson. There is a 2 red oak keel shoe below that which is lagged to the lead. The rudder is constructed of oak planks that are bolted together and hung on a custom fabricated stainless steel heel fitting.
The double sawn oak frames land on 24 centers and are approximately 5 thick with the futtocks side fastened with 1 1/4 oak tunnels. Limber holes are cut into each frame just outboard of the keel for drainage. The transom is framed out with oak vertical frames including a transverse strongback and shaped cheek pieces.
Hertiage is framed with red oak planking that runs approximately 4 thick at the garboards, 3 thick at the lower board strakes and tapers down to 2 1/2 into the outer bilge turns. The hull planking is fastened 3/8 x 6 galvanized boat spikes. The entire hull interior is sealed for additional logitudinal strength with 2 1/2 thick planks of douglas fir that are spiked to the frame faces. The water tight bulkheads are constructed of 2 vertical pine that is splined with reinforced oak horizontal framing. Her deckhouses are bolted in place vertically and are rodded in horizontally to lock the structures in place. They are contructed of oak framing and pine planking.
Spars & Rigging
The spars consist of 19 diameter solid pressure treated?Douglas Fir masts stepped to the keelson and supported at the decks by heavy cross bolted solid oak partners. The bowsprit is also constructed of douglas fir and painted out white. The booms and gaffs are tapered?pressure treated Douglas Fir as well?as the top masts.?The standing rigging consists of galvinized plow steel wire with conventional wood deadeyes set up with poly three strand lanyards. There are ratlines installed on the shrouds for access aloft by crew members for maintenance, setting sail?and necessary inspections of the rig. The running rigging is a mix of three strand poly-dacron halyards, sheets etc. The owners are in the process of replacing nearly 2000 of the existing running rigging with new line for the uncoming season.
The Heritage is equipped with two large kedge style anchors of 500 and 600 pounds respectively with all chain rodes of 1 and 3/4 housed in deck chain boxes with direct leads to a large double cat-headed windlass with rocking arm pawls. The windlass has been converted from a manual operating system to a hydraulic system. The system is powered by the on deck petrol fired donkey engine that runs the primary hydraulic pump.
Machinery and Pumps
As noted above there is a large petrol fired donkey engine that is installed forward to port of the foremast and used primarily to run the hydraulics and the 1 1/4 Jabsco centrifugal wash down or fire pump. In addition there is?a Pacer 2 portable?petrol driven fire and emergency bilge pump?mounted in the forward house tool compartment. This system is coupled to a manifold that?through hard piping is connected to each of the staterooms. Additional onboard pumps include various 12 volt pumps for handling?grey water?transfer and discharge from the holding tanks as well as operation of the cabin toilets. There are several 12 volt pressure domestic water pumps set up to service all of the passenger cabins and the demands of the galley.
-9 Deep Cycle 8D Batteries
-Power Surge multi-volt Dedicated Charger
-Honda 2000 Watt Portable Gasoline?Generator Unit
-3000 Watt Cobra Solid State Inveter Unit
Hertiage has a 16 planked wood heavily constructed yawl boat that is equipped with an inboard gasoline engine for power. Planked in cedar over bent oak frames this is an open boat with an engine mounted midships under a protective lift up box. The yawl boat is propelled by a?300 CI six cylinder Ford-Osco engine that is coupled to a Borg-Warner Velvet Drive transmission. Forward of the engine box is a stainless steel 30 gallon fuel tank.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.