Custom Built Tayana () for sale at | 22.447 Boats, yachts & ads at

The most important things at a glance
Custom Built Tayana ()
Type:Sailing boats
New / used:Used
Year built:2013
Length:19,81 m (65,0 ft.)
Width:5,41 m (17,7 ft.)
Anchored at:San Diego FOB, CA
Full list of details about this ad
Custom Built Tayana ()
No detail information available, please contact the dealer to find out more about this listing.
Description & specifications
Custom Built Tayana ()
English description

The TAYANA 65 was designed by Robert Harris to meet the needs of those yachtsmen who demand the maximum of everything -- maximum comfort and maximum safety at sea. She comes in several different configurations and Ta Yang offers great flexibility in the design and layout of the accommodations. The 65 offers the experienced, knowledgeable yachtsman an opportunity to own a world class yacht with virtually no compromises.
65 Deck Salon Under Sail
Builder Tayana
Designer Robert Harris
LOA 65 ft 0 in
Beam 17 ft 9 in
Displacement 74,000#
Hand laid up FRP hull, white, with blue cove stripe and boot top. Construction is KNYTEX double and triple diagonal with AIREX foam sandwich. CORMAT core is used in keel area.Cast iron ballast encapsulated
Deck and Hardware
Hand laid up FRP with KNYTEX and Baltex cored sandwich
Molded nonskid on deck and deck house
Teak cockpit seats and floor
FRP cockpit coaming
Aluminum hatches
Stainless steel opening ports
Teak exterior handrails
Stainless steel stern pulpit
Aluminum toe rail with hawse holes & (6) mooring cleats
Vetus Dorade vents with FRP boxes
FRP seahood
Propane locker for (2) 20# tanks, vented overboard
Lazaret hatch
(2) Coaming lockers
Plexiglass or Teak weather boards
Swimming ladder, stainless steel, mounted on molded swim/dive platform on transom aft
Double stainless steel anchor sprit with stainless steel rollers
Chain locker and (1) deckpipe
Stainless steel stanchions with vinyl covered double life lines with gates port and stern
Stainless steel bow pulpits
Aluminum mainsheet traveler with roller cars
Aluminum staysail traveler tracks with cars
Aluminum genoa tracks with cars
Winched LEWMAR; cutter
(2) 66 CST jib sheet
(2) 54 CST secondary sheet winches
(2) 44 CST mainsheet winches
(1) 46 CST halyard winch
(1) 40 CST halyard winch
(1) 30 CST halyard winch
Plexiglass sliding companionway hatch
Instrument console mounted on seahood
Diesel engine--YANMAR 6-3544 135 HP (or equivalent) with Scatra flex coupling
Engine cooling water intake strainer
Dripless shaft gland on 316 stainless steel prop shaft
Bronze 3-blade propeller
Fiberglass drip pan
Engine room blower
Teak joinery & cabinetry throughout
Teak & holly cabin sole
Teak veneer in all lockers
White formica counters in head & galley
Teak framed mirror in head(s)
Interior teak handrails
V-berth filler (if applicable)
Cloth cushion covers on 4 cushions
Ice chest insulated with 4 foam & stainless steel lined
Interior varnished with high quality polyurethane satin
Stove alcove stainless steel lined
Easily removable head liner
Teak ceiling on all exposed hull areas
Teak fiddles & teak trim on counters & tables
4 Foam cushions
Solid teak doors & frames
Engine room sound insulated
(2) 200-amp hour batteries
(12) 12v Cabin lights overhead & (8)reading lights
12v Electrical system with 3-way switch
NEWMAR electric panel with breakers
Volt meter & ammeter
12v Power outlets throughout the yacht
Electrical system totally bonded
110v Shore power system with 50-amp power socket
Electric panel with breakers
Voltmeter & ammeter
110v Outlets throughout yacht
International rules running lights to meet IMCO standards
12v Deck flood light
12v Anchor light
Pedestal steering, cable mounted in special FRP pedestal
Stainless steel 40 destroyer-type steering wheel
Teak emergency tiller
Stainless steel rudder shaft
(2) 75-gallon Mild steel fuel tanks
(2) Stainless steel fresh water tanks, total of 250 gallons
30-gallon Holding tank, FRP
Hot water heater 110v & engine heat exchanger
Manual marine heads
Hot and cold pressure water system to heads, galley and other areas required
(1) High capacity manual bilge pump
(1) Heavy duty electric bilge pump
Bilge pump strainers
Sea cocks on all through hull fittings
Shower sump tanks with 12v pumps in each shower
DOES NOT INCLUDE SPARS, SAILS, OR RIGGING Many options available installed at the factory or done here at our office!
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his/her agents or surveyors to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Custom Built Tayana ()

Here you can download an exposé of the current ad. To display the document you will need the Adobe Acrobat Reader which you can obtain here for free.

DeutschExposé Download
EnglishExposé Download
AmericanExposé Download
SpanishExposé Download
ItalianExposé Download
CroatiaExposé Download
Ask a question about this ad here

Ask a question about this ad here

You can submit questions about this ad to the dealer here.

Spam protection: 9 + 17 =

Picture gallery (3)

Bildergalerie Custom Built Tayana () - Image 1
Bildergalerie Custom Built Tayana () - Image 2
Bildergalerie Custom Built Tayana () - Image 3

Similar offers